[Win2k] Autorun

loran90

Herzlich willkommen!
Autorun

Hi,

als Neuling auf diesem Board möchte ich auf diesem Wege erst einmal ein großes Dankeschön für die herzliche Begrüßung per pm an alle Beteiligten aussprechen.
Schon schlimm genug, daß mein erstes posting gleich eine Frage sein muß und nicht eine Antwort. :)

Zu meinem Problem:

Viele alte Win9x-Hasen wird diese Funktion ein Begriff sein:
Automatische Benachrichtigung beim Wechsel.
Da es diese Funktion, zumindest an besagter win9x-Stelle im Gerätemanager, unter w2k nicht mehr zu geben scheint, nenne ich diese einfach einmal autorun. :)

Jetzt meine Frage mit konkreter Konstellation:
1 CD-Brenner, 1 CD-Rom (beides IDE) + 1 CD-Brenner (SCSI)

Ich möchte die autorun-Funktion separat zuweisen können, d.h. in meinen Fall: nur die autorun-Funktion des SCSI-Brenners soll deaktiviert werden.

Ist mein Vorhaben umsetzbar, oder bietet w2k schlichtweg nicht diese Möglichkeit?

Vielen Dank für eure Hilfe.

Gruß
loran90

P.S. An dieser Stelle ein spezieller Gruß an SevenSpirits. :)
 
Das geht aber dazu mußt Du in der Registry den String autorun suchen und das entsprechende CDROM identifizieren. Den Wert für autorun setzt Du dann von 1 auf 0 das wars.
 
Ich glaube, Ty hat recht - unter Windows 2000 geht's nur alle oder keines:


1. Benachrichtigung über Medienwechsel zu aktivieren oder zu deaktivieren:

mit HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Cdrom\Autorun

2. AutoRun-Funktion für CDs deaktivieren ( nachfolgenden Schlüssel auf 0xb5 setzen ):

HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer\NoDriveTypeAutoRun
 
Unter WIN98 kann ich das auch unter :
<HKLM> <ENUM> <SCSI >
für jedes Laufwerk separat einstellen .
(Siehe Anhang)

Könnte das bitte für Windows 2000 verifiziert werden ?

Danke
SevenSpirits
 

Anhänge

  • hw-autorun.jpg
    hw-autorun.jpg
    70,5 KB · Aufrufe: 569
Also unter Windows XP ( wird bei Windows 2000 auch nicht anders sein )

finde ich beim SCSI-CD-Brenner lediglich einen Key "MediaChangeNotification", der allerdings

vom Betriebssystem nicht benutzt wird - egal, ob ich die Medienwechsel-Benachrichtigung

aktiviere oder nicht. :confused ( siehe Anhang )
 

Anhänge

  • snap1.gif
    snap1.gif
    22,9 KB · Aufrufe: 485
Windows 2000 - da ist nix zu finden,
weder unter "MediaChange..." noch unter "AutoInsert..." :(

Bleibt also wohl nur der Weg über "AutoRunAlwaysDisable"....
 
Relevante Registry Einträge Windows 2000

Relevante Registry Einträge Windows 2000



AutoRunAlwaysDisable
<HKLM\SYSTEM\CurrentControlSet\Services\Cdrom>

(Suppresses the Media Change Notification (MCN) message for particular CD-ROM drives.)

This entry identifies devices that do not support media features. Typically, this list consists of CD-ROM changers that do not support Autoplay because they must load the media physically to verify that it is a compact disc before playing.
The entries in this list need not be complete device identifiers. The system suppresses the MCN message for all devices that begin with the characters of an entry in the list. This method makes it easier to disable media features for all products of a certain vendor or product line.

Note
If the value of this entry is not blank, it takes precedence over a value of_1 in AutoRun for the particular devices identified.
If a device is identified in this list, Autoplay does not operate on the device, regardless of the value of the NoDriveAutoRun entry (in HKLM and HKCU) and the NoDriveTypeAutoRun entry (in HKLM and HKCU).
The identifiers listed in this value are those reported to the system by the device. These identifiers might differ from those listed on the drive housing.
The default value for this entry consists of products and product groups that have been identified through testing as being unable to support Autoplay. This list might change as testing progresses and products are updated.

Tip
To disable Autoplay on particular drives, use the NoDriveAutoRun entry (HKLM or HKCU) or the NoDriveTypeAutoRun entry (HKLM or HKCU). Do not disable the MCN message unless you have no alternative.




Autorun
<HKLM\SYSTEM\CurrentControlSet\Services\Cdrom>

(Determines whether the system sends a Media Change Notification (MCN) message to the Windows interface when it detects that a CD-ROM is inserted in the drive. The MCN message triggers media-related features, such as Autoplay.
If the MCN message is disabled, the media features that use it do not operate.)

Change method
To change the value of this entry, use Device Manager.

Activation method
To make a change to this entry effective, you must restart Windows_2000.

Note
If the value of this entry is_0, Autoplay does not operate, regardless of the value of the NoDriveAutoRun entry (in HKLM and HKCU) and the NoDriveTypeAutoRun entry (in HKLM and HKCU).

Tip
To disable Autoplay on particular drives, use NoDriveAutoRun (in HKLM or HKCU) or NoDriveTypeAutoRun (in HKLM or HKCU). Do not disable the Media Change Notification message unless you have no alternative.



NoDriveAutoRun (in HKLM)
<HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer>

(Determines whether the Autoplay feature is enabled on each drive connected to the system. When Autoplay is enabled, media starts automatically when it is inserted in the drive.
The value of this entry consists of 32 bits. The lower 26 bits each represent a drive, with the lowest (right-most) bit representing drive A, and the 26th bit from the right representing drive Z. If a bit is set to 0, the Autoplay feature is enabled on that drive. If a bit is set to 1, the Autoplay feature is disabled on that drive.)

Note
A Media Change Notification (MCN) message from the CD-ROM driver triggers Autoplay. If the Windows interface does not receive this message, Autoplay does not operate, regardless of the value of this entry. Entries that suppress the MCN message, such as Autorun and AutorunAlwaysDisable, also disable Autoplay.
Autoplay is also disabled on any drive if it is disabled by the value of NoDriveAutoRun (in HKLM or HKCU) or NoDriveTypeAutoRun (in HKLM or HKCU). But if either of these entries appear in HKEY_LOCAL_MACHINE, the corresponding entries in HKEY_CURRENT_USER are ignored.
Although this entry is located in the Policies\Explorer subkey, it is not associated with a Group Policy included in Windows 2000.
Windows 2000 does not add this entry to the registry. You can add it by editing the registry or by using a program that edits the registry.

Tip
For detailed information about particular Group Policy settings, see the Windows 2000 Resource Kit Group Policy Reference.
For general information about Group Policy, see Windows 2000 Server Help or Windows 2000 Professional Help.



NoDriveAutoRun (in HKCU)
<HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer>

(Determines whether Autoplay is enabled on each drive connected to the system. When Autoplay is enabled, media starts automatically when it is inserted in the drive.
The value of this entry consists of 32 bits. The lower 26 bits each represent a drive, with the lowest (right-most) bit representing drive A, and the 26th bit from the right representing drive Z. If a bit is set to 0, the Autoplay feature is enabled on that drive. If a bit is set to 1, the Autoplay feature is disabled on that drive.
For example, if the value of this entry is 0x8 (1000 binary), Autoplay is disabled on drive D.)

Note
Autoplay is triggered by a Media Change Notification (MCN) message from the CD-ROM driver. If the Windows 2000 interface does not receive this message, Autoplay does not operate, regardless of the value of this entry. Entries that suppress the MCN message, such as Autorun and AutoRunAlwaysDisable, also disable Autoplay.
Autoplay is also disabled on any drive if it is disabled by the value of NoDriveAutoRun (in HKLM or HKCU) or NoDriveTypeAutoRun (in HKLM or HKCU). However, if NoDriveAutoRun or NoDriveTypeAutoRun appear in HKEY_LOCAL_MACHINE, the corresponding entries in HKEY_CURRENT_USER are ignored.
Although this entry is located in the Policies\Explorer subkey, it is not associated with a Group Policy setting in Windows 2000.
Windows 2000 does not add this entry to the registry. You can add it by editing the registry or by using a program that edits the registry.



NoDriveTypeAutoRun (in HKLM)
<HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer>

(Disables the Autoplay feature on all drives of the type specified.
Autoplay begins reading from a drive as soon as media is inserted in the drive. As a result, the setup file of programs and the sound on audio media starts immediately.
This entry stores the setting of the Disable Autoplay Group Policy. Group Policy adds this entry to the registry when you enable the Disable Autoplay policy. If you disable the policy or set it to Not configured, Group Policy deletes this entry from the registry, and the system behaves as though the value is 0x95.
This entry is a bitmapped value. To disable Autoplay on a particular type of drive, set the bit representing that drive type to 1. To disable more than one type of drive, set the bits representing each type to 1, or sum the hexadecimal values of the representative bits.)
By default, Autoplay is disabled on removable drives, such as the floppy disk drive (but not the CD-ROM drive), and on network drives. The default value 0x95 (149) is the sum of 0x1, 0x81 (unknown types), 0x4 (floppy drives), and 0x10 (network drives).

Note
A Media Change Notification (MCN) message from the CD-ROM drive triggers Autoplay. If the Windows interface does not receive this message, Autoplay does not operate, regardless of the value of this entry. Entries that suppress the MCN message, such as Autorun and AutoRunAlwaysDisable also disable Autoplay.
Autoplay is also disabled on any drive if it is disabled by the value of NoDriveAutoRun (in HKLM or HKCU) or NoDriveTypeAutoRun (in HKLM or HKCU). But if NoDriveAutoRun or NoDriveTypeAutoRun appear in HKEY_LOCAL_MACHINE, the corresponding entries in HKEY_CURRENT_USER are ignored.
You can use the Disable Autoplay Group Policy to add CD-ROM drives to the list of drive types already disabled (removable drives, network drives, and unknown drives) or to disable Autoplay on all drives. You must edit the registry to set any other value.



NoDriveTypeAutoRun (in HKCU)
<HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer>

(Disables the Autoplay feature on all drives of the type specified.
Autoplay begins reading from a drive as soon as media is inserted in the drive. As a result, the setup file of a program or the sound on audio media starts immediately.
This entry stores the setting of the Disable Autoplay Group Policy. Group Policy adds this entry to the registry when you enable the policy. If you disable the policy or set it to Not configured, Group Policy deletes this entry from the registry, and the system behaves as though the value is 0x95.
This entry is a bitmapped value. To disable Autoplay on a particular type of drive, set the bit representing that type of drive to 1. To disable more than one type of drive, either set the bits representing each type to 1 or sum the hexadecimal values of the representative bits.
By default, Autoplay is disabled on network drives and on removable drives, such as the floppy disk drive (but not the CD-ROM drive). The default value 0x95 (149) is the sum of 0x1 (unknown types), 0x81 (unknown types), 0x4 (floppy drives), and 0x10 (network drives). )

Change method
To change the value of this entry, use Group Policy. This entry corresponds to the Disable Autoplay Group Policy (User Configuration\Administrative Templates\System).

Note
Autoplay is triggered by a Media Change Notification (MCN) message from the CD-ROM driver. If the Windows 2000 interface does not receive this message, Autoplay does not operate, regardless of the value of this entry. Entries that suppress the MCN message, such as Autorun and AutorunAlwaysDisable also disable Autoplay.
Autoplay is disabled on any drive if the value of NoDriveAutoRun (in HKLM or HKCU) or NoDriveTypeAutoRun (in HKLM or HKCU) is set to disable it. But if NoDriveAutoRun or NoDriveTypeAutoRun appear in HKEY_LOCAL_MACHINE, the corresponding entries in HKEY_CURRENT_USER are ignored.
You can use the Disable Autoplay Group Policy to add CD-ROM drives to the list of drive types already disabled (removable drives, network drives, and unknown drives) or to disable Autoplay on all drives. You must edit the registry to set any other value.

Tip
For detailed information about particular Group Policy settings, see the Windows 2000 Resource Kit Group Policy Reference.
For general information about Group Policy, see Windows 2000 Server Help or Windows 2000 Professional Help.
To see a table associating policies with their corresponding registry entries, see the Group Policy Registry Table.
 
Zuletzt bearbeitet:
@ LT : Gerne geschehen - Das Thema ist spannender als jeder Krimi und interessiert mich selber sehr

:D Allerdings hat es Ähnlichkeit mit dem Antrag auf Antragsstellung auf Aushändigung einen Antragsformulares ... :D
 
TIP2300/RH2316.HTM

NOTE:
If you set the NoDriveTypeAutoRun value via the Disable Autoplay Group Policy, you can add the CD-ROM drive type or disable Autoplay on all drive types. Any other settings must be done via the registry.

Autorun is 0, Autoplay is disabled on all drives. If Autorun is 1, you can hold down the shift key as you change media to prevent Media Change Notification (MCN). Appropriate settings in NoDriveAutoRun also disable Autoplay.



tip3700/rh3733.htm

You can suppress the MCN message for specific vendor / products by configuring the AutoRunAlwaysDisable value name, a REG_MULTI_SZ data type, at HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Cdrom.

Typically, AutoRunAlwaysDisable contains a list of of devices that do NOT support Autoplay, because they must load the media to verify that the device is a CD-ROM, such as a changer.
The entries in AutoRunAlwaysDisable suppress the MCN message for all devices that match the character string you enter, starting at the beginning. You could disable all CD-ROMS manufactured by ABC Company, by setting one line to ABC.
If a device is identified in AutoRunAlwaysDisable, Autoplay does NOT operate on the device, regardless of the value of Autorun, NoDriveAutoRun, or NoDriveTypeAutoRun.
Use AutoRunAlwaysDisable as a last resort for disabling Autoplay.
 
Das Witzige an der Sache ist, daß ich den "AutoRunAlwaysDisable"-Eintrag eher per Zufall gesehen habe -
und mal so "auf gut Glück" eine Vermutung anstellte.
Daß da tatsächlich etwas dran sein könnte, bemerkte ich erst später...
 
Als WIN98 - User stelle ich nun mal mein persönliches Fazit zur Diskussion :


Vorbemerkung zu WIN 98 Erfahrungen :

Unter WIN 98 habe ich immer wieder festgestellt , daß bestimmte Registry Werte und Schlüssel per Default nicht angelegt sind . Der Einsatz von RegMon und RSW bestätigt dies immer wieder : " Entry : not found " oder "Schlüssel ist nicht vorhanden"

Eine anderes Merkmal ist die unterschiedliche Abfolge des Abrufs bestimmter Registry Einträge und Schlüssel bei ein und dem selben Vorgang .
(Ein verifizierbares Beispiel bleibe ich jetzt mal schuldig )
Dies scheint meines Erachtens auch auf Windows2000 zuzutreffen .

Eine weitere Problematik fällt unter den Bereich ( die Bereiche ) der
Registry Wiederherstellung - Windows Reinstallation - Windows Reparatur Konsolen - Windows Updates :
Bisherige (die Veränderten) Einträge werden nicht übernommen und/oder verändert / zurückgesetzt .
Neue Einträge werden vorgenommen , so daß die Abfolge des Aufrufes der Registryeinträge sich wieder ändert .
Letztendlich läßt sich dies nur mit dem Vergleich von Protokolldateien geeigneter Programme überprüfen (zB RegMon und FileMon) .




Meine Vorgehensweise wäre Folgende :

1. Sicherung der bestehenden Registry :

a) Gesamte Registry exportieren :
Dadurch können Settings wieder auf einfache Art und Weise reimportiert werden .

b) Einzelsicherung der System.Dat und User.Dat :
Unter Punkt a) lassen sich nur die Registry-Einträge wiederherstellen , welche sowohl in der Sicherung als auch in der veränderten Registry vorhanden sind . Neu hinzugekommene Einträge werden nicht berücksichtigt !

Bemerkung :
Unter WIN98 empfiehlt es sich dann die Systemdateiprüfung aufzurufen und veränderte + gelöschte Dateien zu suchen und zu bestätigen . Anschließend Registrierungsprüfung durchführen . Dies verhindert mögliche Endlosschleifen aus Boot - Registrierungsprüfung -
" Eine fehlerfreie Registrierung wurde wieder hergestellt " - ReBoot usw.
(So schon geschehen bei NViDiaTreiber UpDates sowie bei NAV - ohne Einzelsicherung und Startmenü für Starten im Abgesicherten Modus hätte ich da nichts mehr retten können ....)


2. Lösungsansätze :

# 1 :
(Wäre schön , wenn dies so " einfach " wäre ... )
Gibt es eine Möglichkeit , daß Windows2000 das SCSI Laufwerk als Netzlaufwerk erkennt ? Wenn ja , dann Autoplay für Netzlaufwerke abschalten .

#2 :
(Bezieht sich auf tip3700/rh3733.htm)
" You could disable all CD-ROMS manufactured by ABC Company, by setting one line to ABC. "
Gemeint ist den Hersteller des SCSI-LW dort einzutragen (falls es ein anderer Hersteller ist als für die beiden anderen Laufwerke )

#3 :
(bezieht sich auf Posting : Relevante Registy Einträge Windows
AutoRunAlwaysDisable = 0
Autorun = 1
In den Einträgen NoDriveAutoRun (in HKLM) und NoDriveAutoRun (in HKCU) die Werte für das zu deaktivierende SCSI-Laufwerk zu editieren .
NoDriveTypeAutoRun (in HKLM = 0
NoDriveTypeAutoRun (in HKCU) = 0



Schlussbemerkung :
Hintergrund meines speziellen Interesses ist die Überlegung auf meinem Internet-Rechner Win2000 zu installieren . Die Lösungsansätze entstanden nachdem ich mir alles mehrfach durchgelesen und aufskizziert habe . Da ich bis dato kein WIN2000 installiert habe , bitte ich darum mir Logikfehler oder Fehlinterpretation etwas nachzusehen . Es ist mir auch bewußt , das aus den vorgeschlagenen Änderungen Folge-Probleme resultieren können .





:) SevenSpirits :)
 
Kleine Korrektur für W2k:

"AutoRunAlwaysDisable" ist kein DWord-Eintrag, sondern ein MultiString in der Form

Hersteller 1.....
Hersteller 2...
.
.
Hersteller x

der sich im "normalen" Registry-Editor nur sehr schwer bearbeiten läßt (es werden nur Hex-Zahlen angezeigt).
Hiefür gibt es in Windows 2000 den 2. Registry-Editor "regedt32.exe",
der solche Strings korrekt darstellt und die Eingaben überprüft.
Unter XP ist RegEdit so verändert, daß auch Multi-Strings bearbeitet werden können.
Der Aufruf von regedt32 startet RegEdit....
 
Hallo in die Runde,

was ist denn hier los? Hat ja schon fast den Anschein, daß ihr alle eure Doktorarbeit schreibt. :)
Schluß mit lustig, aus mit Spaß :) ...
Erst mal ein fettes Dankeschön für die extrem große Resonanz auf meine Frage.

Habe nun folgendes getestet:
mit regedt32 den AutoRunAlwaysDisable-Wert bearbeitet.
was soll ich sagen? Mit meinen 2 IDE-Geräten hat das super funktioniert (Neustart erforderlich). Also wer in nächster Zeit seine CDRoms/Rams (könnte mit IDE-DVDS evtl. auch funktionieren) deaktivieren will, kann es so probieren, bei mir hat das bei einem kurzen Test mit einer Musik-CD einwandfrei funktioniert.
Wie der Zufall, sozusagen eine tragische Komödie ;), es will, scheint die Funktion aber nicht auf mein SCSI-Gerät anzusprechen.
Hab ich mir dann gedacht, schreib ich einfach noch zusätzlich den Hersteller meines Controllers (Adaptec) in die List, hat aber trotzdem nicht funktioniert.
Möchte kurz auf das eingehen, warum ich dies überhaupt so machen will. Nein, nicht um euch zu ärgern. :)
Hatte letzte Woche an 2 Tagen hintereinander eine Fehlfunktion meines Teac CDR-55S (SCSI), ließ sich nach geraumer Zeit nicht mehr in Win ansprechen. Kiste auf, Stromversorgung + SCSI-Kabel ab, neu ran, gings wieder, sozusagen Wackelkontakt. :)
Seit dem 2x scheint alles wieder i.O. zu sein, wollte deshalb, weil ich das Gerät sehr selten gebrauche (mein schon etwas betagter Sony-Auto-CD-Wechsler scheint komischerweise mit den Sicherungskopien meines alten Teacs besser zurecht zu kommen als mit denen meines neuen Teac CD-W540E, deshalb ist mein alter Teac noch in Gebrauch) es gleich disablen, weil ich das nicht brauche, daß das Gerät alle xy sek. blinkt und nach einem Medium sucht.

Soweit fürs erste. Bis zum nächsten mal, danke und
Gruß
loran90.
 
Original geschrieben von SevenSpirits
.. ob das nicht andere Ursachen hat ? :confused

Hi SevenSpirits,

das scheint bei dem Teac-CDR-55S-Gerät normal zu sein.
Stelle ich in der reg bei HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Cdrom\Autorun

den wert von 1 auf 0 (also Komplett-Deaktivierung), blinkt das Gerät nicht mehr.

Gruß
loran90
 
das scheint bei dem Teac-CDR-55S-Gerät normal zu sein.

Hi loran90 ,
wie Recht Du hast - habe Folgendes gefunden :

After many many tests we found the problem. On the SCSI chaine we have a CDR Teac 55S. This machine regulary checks the SCSI chaine and does some clicks with the Studio in record or play (I know it is curious but it is true ) , and with each click ,we have in the Studio driver the message : '' loss of realtime ''. If you use an other CDR (I do some tests with a HP and a Philipps with succes ) it is ok. With the Teac if you put a CD in the unit , it is ok. That works. This is all. QUELLE
Interessant aber auf Dauer wohl nicht zufriedenstellend ....


Die Lösung ?

Windows 2000 : Teac CD-R55s funktioniert nicht richtig
Firmwareversionen vor "R" haben Probleme mit dem erweiterten Befehlssatz von Windows 2000 zur Ansteuerung von SCSI-Geräten.
Das äussert sich vor allem darin, dass die Laufwerkslampe des CD-R55S permanent leuchtet, wenn beim booten von Windows keine CD-R im Laufwerk lag - ein Zugriff auf den Brenner ist nicht möglich.
Abhilfe schafft ein Update der Firmware auf mindestens Revision "R".
Herunterladen kann man das Update hier .
Eine deutsche Anleitung zur Installation findet sich hier .
Zu beachten ist ausserdem, dass das Update nur unter Win9x durchgeführt werden sollte. Der Teac-Support (support@teac.de) verschickt auch ein DOS-Flashprogramm, welches den Teac auch mit einer DOS-Bootdisk aktualisieren kann. Diese muss allerdings dann die Treiber für den SCSI-Controller laden, nicht aber die ASPI-Treiber!

Es ist möglich , daß es neuere Firmware-Versionen für Deinen TEAC CD-R55S (Exakte TEAC Bezeichnung) gibt -
war zu faul zum googeln .


:D Falls das Firmware UpDate erfolgreich war :D , wäre es sehr interessant zu erfahren , ob die Registry Anpassungen nun auch für das SCSI LW funktionieren .




Anbei noch ein Link :
Notes, Manuals and FAQs
Diverse User Guide`s



:) SevenSpirits :)
 
Zuletzt bearbeitet:
Hi,
da muß ich dich enttäuschen, SevenSpirits. Auf 1.0R habe ich schon seit ewig langer Zeit geflasht. Eine neuere firmware, schätze ich, wird es wohl auch in Zukunft nicht mehr geben.

Habe nun testhalber mein altes Plextor PX-32TS an den SCSI-Bus gehängt und dort in AutoRunAlwaysDisable die Deaktivierung erfolgreich getestet.
Somit scheint wohl so gut wie sicher, daß der CD-R55S der "Übeltäter", sprich: wohl nicht kompatibel ist, um auf diese Funktion anzusprechen.
Wie heißt es so schön? Ausnahmen bestätigen die Regel.
Damit kann ich aber gut leben, da ansonsten das Gerät absolut zuverlässig ist. Wenn ich überlege ... das Gerät war schon unter meinem alten P1-133 im Einsatz. Deshalb hatte ich auch vor jetzt fast exakt 1 Jahr mir wieder einen neuen Teac-Brenner zugelegt, da ich von solch einer Robustheit bzw. Zuverlässigkeit begeistert bin.

Vielen Dank an alle Beteiligten für eure Hilfe. Ansich kann das topic (jetzt) verschoben werden.

Gruß
loran90
 
Oben